• Reduces 97% chlorine¹ to limit barrier disruption
• Reduces mineral deposits that buildup on hair and skin with 82% scale inhibition across 8,000 litres²
• Reduces unwanted heavy metals and impurities to preserve hair and skin health
• Features HydroTrack™ filter tracking, SmartRefill™ filter replacement light, and SmartHeat™ temperature light
• Twists on in seconds
• 1-year warranty and 100-day returns

¹ Independently tested for free chlorine reduction by SGS across a 10,000-litre service life.

² Tested at 396 ppm hardness at 8 L/min, across 1,000–8,000 liters. 73–95% inhibition observed with minimum 82% at end of life. Results target calcium and magnesium carbonate scale. Results may vary depending on local water hardness and water composition.

Dimensions - Width: 93.2mm/3.67”, Length: 270mm/10.6”, Depth: 103mm/4”
Weight - 340g / 0.75lbs
Thread Size - 1.27cm / 0.5” (fits all showers)
Flow Rate - 6-9L/min
Finish - Brushed Metal

• 88% noticed softer hair and skin*
• 85% noticed less frizzy and brittle hair*
• 79% noticed less skin dryness and sensitivity*

*Hello Klean Clinical Trial

Winner of Best In-Shower Product, Esquire Grooming Awards 2026
Winner of Best Hair Innovation, Who What Wear UK, Next in Beauty Awards 2026
Winner of Home & Lifestyle Product, Beauty Independent / Indie Beauty Expo, Beacon Awards 2026

Installing your Shower Head+

• Remove your old shower head
• Attach your Hello Klean Shower Head+ to the hose
• Run the water for 30 seconds
• Download the app to connect and follow the in-app setup prompts

Recycling your Shower Head+

• The outer packaging is fully recyclable
• Shower Head+ is designed to be refillable for long-term use
• Recycle the plastic filter casing, compost the pouch

• Removes over 98% of chlorine and more than three-quarters of copper across the full 760-litre filter life¹ to limit barrier disruption
• Reduces mineral deposits that build up on skin with 92% scale inhibition²
• Reduces lead by up to 98%³
• KleanStream™ Technology: The filtered microbubble mode provides a more thorough yet gentle cleanse by increasing water to skin contact. 93% agreed microbubble mode enhanced their cleansing experience⁴
• Features HydroTrack™ technology that tracks real water usage so you never use it past the point of peak protection.
• SmartRefill™ filter replacement light indicates when it’s time to change your filter.
• Installs in 5 minutes. Check our guide to see if it fits your tap.
• 1-year warranty and 100-day returns

¹ Independent laboratory tests, October 2026: chlorine reduction stayed above 98% and copper reduction above 78% at 0, 200, 400 and 760 litres, tested at 2 L/min to our test protocol. Read the reports: Chlorine · Copper

² Achieved 92.51% scale inhibition when new, measuring 65% at 400 litres and 62.5% at both 1,200 and 2,000 litres.

³ Tested using lead-spiked water at 150 ± 30 µg/L (over 12 times the UK drinking-water standard of 10 µg/L) across 1,000 litres. Lead reduction measured 98.58% when new and measured 86.96% at 750 litres and 54.59% at 1,000 litres. Results may vary depending on lead concentration, water chemistry, flow rate and usage.

⁴ Consumer-perception evaluation involving 30 participants after 28 days; 93.3% gave a positive satisfaction rating for the microbubble cleansing statement.

Dimensions - Width: 70mm/2.75”, Length: 180mm/7.08”, Depth: 97mm/3.82”
Weight - 315g / 0.69lbs
Flow Rate - 1-3L/min
Finish - Black: Matte, Chrome: Brushed Metal

• 93% agreed their skin felt more hydrated after 28 days*
• 90% agreed skin redness improved after 28 days*
• 87% agreed their skin felt less oily after 28 days*

* Consumer-perception claims from a 28-day in-use test of Skin Filter on 30 adults with sensitive skin, under dermatologist supervision; no adverse skin reactions recorded (33 enrolled, 30 completed). Percentage results reflect satisfaction ratings of 4 or 5 out of 5 for the relevant statement. Individual results may vary.

Installing your Skin Filter

• Remove your tap nozzle. If standard (external), twist clockwise to remove (use a wrench or pliers if stuck). If hidden (internal), rotate clockwise with the included removal tool
• Install the adaptor that fits your tap, using the adaptor wrench to tighten
• Attach your Skin Filter to the adaptor, pushing until you hear a ‘click’
• Run water through Skin Filter for 1 minute
• Download the app to connect and follow the in-app setup prompts
  

Recycling your Skin Filter

• The outer packaging is fully recyclable
• Skin Filter is designed to be refillable for long-term use