Get set up in no time with easy steps for your Rain Shower, Handheld Shower Head, or Shower Filter.
1
Shower Filter
Connects between your tap and shower hose, offering filtration without changing your existing shower head.
2
Shower Head
Connects to your existing handheld shower hose for targeted filtration.
3
Rain Shower
Attaches directly to your wall-mounted shower arm, providing full-body water coverage.
Installation Guide
Unscrew the existing shower head from the handheld shower hose.
Attach the new handheld shower head by screwing it onto the existing hose.
Run the water for 30 seconds.
Refill Guide
Unscrew the Shower Head from the hose.
Open the cartridge compartments located in the top cap and the handle.
Swap the used cartridges and reassemble.
Installation Guide
Detach the shower hose from the tap where it connects.
Screw the Shower Filter onto the tap outlet by hand or wrench(included in package).
Attach the shower hose to the bottom of the Shower Filter, screwing it tightly.
Run the water for 30 seconds.
Refill Guide
Unscrew the Shower Filter from the tap and shower hose.
Open the filter by unscrewing the compartments.
Swap out the old capsule with a new refill.
Assemble and attach the filter to the tap and hose.
Installation Guide
Unscrew your old shower head from the wall-mounted shower arm.
Wrap the threads of the shower arm with leak prevention tape (included in your package).
Screw the Rain Shower by hand or wrench(included in your package).
Run the water for 30 seconds.
Refill Guide
Unscrew the Rain Shower from the shower arm.
Open the filter compartment and remove the used capsule.
Insert the new capsule into the compartment, ensuring it fits snugly.
Reassemble the Rain Shower.
Results from our community.
Don't just take our word for it.
Before
After
Before
After
Before
After
Before
After
Before
After
Before
After